Ultra-high Speed SATA Hard Disk and SSD Duplicator – MT-U Series

Target1 to 71 to 151 to 23
  • Speed transfers of up to 30 GB per minute.
  • Systems & files copy mode supports Windows (FAT16/32/exFAT, NTFS), Linux(ext2/ext3/ext4/LVM), and Mac(HFS, HFS+, HFSX.)
  • Supports multiple SATA I/II/III and 4Kn HDD interface with its open platform design.
  • Supports 2.5″, 3.5″ SATA HDD, SSD and IDE HDD via IDE_SATA convertor. (IDE to SATA adapter-TB1529 is optional)
  • Data Sanitization: Full erase, DoD erase and Secure erase.
  • Features an optional connection for real-time monitoring on a PC.
  • Log report management records all task details for enhanced production management.

U-Reach MT-U series is a professional SATA HDD/SSD duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy 23 HDD targets with a high transfer speed of 30 GB per minute. We guarantee the highest productivity without speed degradation, even as the number of targets increase. The MT series SATA HDD duplicator provides four copy modes: quick smart copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/exFAT), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode. In addition, the MT series SATA HDD/SSD duplicator is equipped with different levels of erase functions, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.

4 Copy Modes


Quick Copy
Quick Copy
The duplicator automatically copies only the data area, supports Windows (FAT16/32/exFAT/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX).
Whole Media
Whole Media
The duplicator copies from the initial sector to the end, bit-by-bit.
All Partitions
All Partitions
The duplicator copies all the partitions and skips undefined area.
Percentage Copy
Sets percentage of source capacity to copy.

Transfer Speed

U-Reach MT-U duplicators copy up to 30 GB/min on all devices simultaneously, without any speed degradation as the number of targets increases.

Transfer Speed 30GB/min

Verification of Data Integrity

Copies are straightforward, but it is imperative that the copied data are verified through a bit-by-bit process to ensure successful copies.


Optional Adapters Supported

Support All types of SATA interface via different adapters.

Optional Adapter Supported-MT-no IDE

Modular Cable Design

When cables wear out, users can quickly swap them out, saving time and money.

Cable for MT-U1402

Sanitization Functions

Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards Secure erase functions wipe drive contents within seconds.

Sanitization Functions

Skip Bad Sectors

End-users are given options to skip bad sectors during erase devices.Skip bad Sectors
Event Log Report

U-Reach Log Report records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Event Log Report


ModelsMT800U / MT1600U / MT2400U
Max. Transfer Speed30 GB/min. (500MB/sec.) *Actual performance is dependent on device transfer rate.
Supported FormatsAll Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown.
Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/3/4).
Operating TypeStand-alone, non PC-based operation
Language SupportEnglish, Japanese
LCD DisplayBacklit Monochrome LCD Display
LEDs3 LED Indicators per Port:

Yellow (Power), Green (Pass), Red (Fail)

Control Panel4 Push Buttons (▲, ▼, OK, ESC)
FeaturesCopy ModesQuick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
Skip Bad-SectorsManually set (Bad sector) threshold range to skip during copy and erase process.
Compare FunctionBit-for-bit data comparison.
Sanitization ModesQuick Erase, Full Erase, DoD Erase, and Secure Erase


PC MonitoringReal-time status monitoring through PC.
Log Report


Monitor real-time recordings and Log Reports via PC-Link.
Event log reports are generated through the USB port and saved to USB devices.
CompatibilitiesOS SupportedAll (Windows, Linux, and other stand-alone systems)
Compatible Interfacesw/o Adapters1.8″/2.5″/3.5” SATA HDDs and SSDs
w/ AdaptersmicroSATA, mSATA, eSATA, SATA M.2(NGFF) and CFast
Advanced FormatsSupports MBR, GPT, and advanced formats.


Power SupplySelectable Voltage 115V or 230V, 50/60Hz
Temperature RangeOperating Temperatures: 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)
Humidity RangeWorking Humidity: 20% ~ 80%
Storage Humidity: 5% ~ 95%
CertificationFCC, CE, RoHS

**Specifications subject to change without notice.

User Guide

Function List for MT Series
4.Erase1. Quick Erase
2. Full Erase
3. DoD Erase
4. DoD EraseComp
5. 7-Pass Erase
6. Secure Erase
7. Enhanced Secure Erase
8. US Army AR380-19
5. Utility1. Show Device Info
2. Update System
3. System Info.
4. Verify HDD
5. Strict Verify HDD
6. Setup1. Start-up Menu
2. Copy AreaSystem and Files
ALL Partitions
Whole HDD
Deep Analysis
3. Copy GPT Backup Area
4. Skip Bad Sectors
5. Minimum Speed
6. Check Source Minimum Speed
7. Language
8. Advanced Setup1. Unknown Format
2. Erase Master
3. Erase Pattern
4. Skip Erase Errors
5. Wait HDD Time
6. Lock Key
7. HPA Copy Mode
8. Clear HPA at ERASE
9. Mark after ERASE
10. Transfer Rate
11. Stop Motor Time
12. Bytes Per Cmd
13. Delete Disk Signature After Copy
9. Restore Defaults
7. Log Manager1. Out Today Report
2. Out Recent Report
3. Out Period Date
4. Advanced Function1. Clear ALL Logs
2. Setup Password
3. Adjust Clock
4. Add Watermark at text File

HDD Series Compare Chart(IN)

Videos for MT Series

FW update

check disk Info

check system Info

event log report

execute Compare

replace SATA cable

Copy from SSD to HDD